TESTING SERVICES
- Breaking load test
- Measurement of Conductor resistance
- Elongation test
- Tensile strength
- Elongation at break
- Tensile test for conductor
- Wrapping test &Brinell)
- Bending test
- Carbon black content
- Carbon black dispersion
- Environmental stress cracking
- High voltage test
- Hot set test
- Insulation resistance test (IR/VR)
- Shrinkage test
- Test for PE insulation
- Melt flow index
- Vicat softening point
- Water absorption test
- Annealing test for copper
- AC high voltage test
- Ageing in air oven
- Armour dimension diameter
- Cold bend test
- Cold impact test
- Flammability test
- Heat shock test
- Hot deformation test
- Loss of mass in air oven
- Thermal stability test
- Mass of zinc coating
- Resistivity
- Torsion test for round wire
- Uniformity of zinc coating
- Winding test for formed wire
- High voltage dc (water immersion) test
- Test for overall dimension test
- Persulphate test (tinned copper conductor cable)
- Lay ratio test
- Construction of fixed socket outlet
- Terminal
- Bending test
- Compression test
- Creepage distances and clearance distances
- Flexible cable and their connection
- Force necessary to withdraw the plug
- Insulation resistance and electric strength test
- Interlocked socket outlet
- Mechanical strength
- Operation of earthing contacts
- Resistance to heat
- Resistance to humidity
- Temperature rise
- Making and breaking capacity
- Protection against electric shock
- Provision for earthing
- Resistance to rusting
- Adhesion to backing
- Adhesion to steel
- Electrolytic corrosion test
- Collapse test
- Resistance to burning
- Weathering tests
- Termite resistance test
- Earthing resistance etc.
- Resistivity
- Torsion test for round wire
- Uniformity of zinc coating
- Winding test for formed wire
- High voltage dc (water immersion) test
- Test for overall dimension test
- Persulphate test (tinned copper conductor cable)
- Lay ratio test
- Construction of fixed socket outlet
- Terminal
- Bending test
- Compression test
- Creepage distances and clearance distances
- Flexible cable and their connection
- Force necessary to withdraw the plug
- Insulation resistance and electric strength test
- Interlocked socket outlet
- Mechanical strength
- Operation of earthing contacts
- Resistance to heat
- Resistance to humidity
- Temperature rise
- Making and breaking capacity
- Protection against electric shock
- Provision for earthing
- Resistance to rusting
- Adhesion to backing
- Adhesion to steel
- Electrolytic corrosion test
- Collapse test
- Resistance to burning
- Weathering tests
- Termite resistance test
- Earthing resistance etc.
CATEGORIES COVERED
- Cross-linked Polyethylene Insulated PVC Sheathed Cables for working voltage up to and including 1100v as per IS 7098 (P-1)1988-
- Aluminiumbars,plates and rods
- M.S. Pipe and Tubes
- /li>
- PVC insulated (heavy duty) electric cables Part-1 for working voltage up to and including 1100 volts as per IS 1554 (P-1)1988
- PVC insulated cablesfor working voltage up to and including 1100 volts
- Aluminium conductors for overhead transmission purpose
- Aluminium conductors galvanized steel reinforced
- M. S. conduit pipe.
- Plug & Socket outlet of rated voltage up to and including 250 volts and rated current up to and including 16 amperes as per IS 1293-2019
- Pressure sensitive adhesive insulating tapes for electric purpose as per IS 7098(P-3/Sec -1)1986
- Rigid Flexible PVC Conduit Pipe as per IS 9537-1988
- Rigid Steel Conduit pipe as per IS 9537-1988
- Switches for domestic and similar purpose as per IS 3854-1997
- Steel pipe,CastIron pipe, Ductile Iron pipe,G. I. pipe, S. W. pipes, Hubbless pipe and fittings etc.
- Steel conduit pipe
- S.S.Plate/Sheet, Strip Chequered plate etc.
- CRC Sheets and strips
- Immersion water heater
- Pump-sets and Motors
- Meter box
- G. I. Box
- Fan Box
- Insulating rubber Mat
- Electrical panels
- MCB/RCB
- MCB Box
- Sun mica sheet for switches
- Bulb holders
- Junction Box
- Conduit fittings (bends, sockets, caps, etc.)
- G. I. and Copper Strips for Earthing etc.
- Enameled winding wires
- Earthing rods and strips
–
Testing of the products is conducted according to IS, ASTM, IEC ISO, DIN, BS /MTNL / RDSO or any other international standard.